Brownfields and Remediation: Restoring Properties with a Past

November 20, 2017

It is challenging to restore properties with a past, but you can do it on time and on budget if you plan ahead to address contaminated historic fill. Follow these tips and use the brownfield redevelopment checklist to keep your next redevelopment on track.

Design Phase
Consider how contaminated historic fill impacts the following:

Site feature locations – You can reduce or even eliminate landfill disposal costs by carefully selecting locations for your building, underground parking, parking lot, utility, and green space.

Storm water infiltration – Do you know that storm water infiltration devices must be located in areas free of contaminated historic fill? Infiltration devices cannot be located where contaminants of concern (as defined in s. NR 720.03(2)) are present in the soil through which the infiltration will occur.

Subslab vapor mitigation system – Already know you have contaminated historic fill on site? Consider adding a subslab vapor mitigation system to the design of your new building. It is usually much cheaper to install this system in a new building than to retrofit one into an existing building. It can also mitigate radon gas.

Planning & Design
Determine if contamination requires the following plans to manage the construction phase:

Material management plan – It establishes how you will separate excavated contaminated material from material that is not contaminated. It also outlines how you will handle contaminated material, either by disposing of it off site in a landfill or reusing it on site in an approved area such as a paved parking lot. This plan also covers screening, sampling, and testing contaminated materials, if required.

Dewatering plan – If the development requires excavation through contaminated historic fill to depths below groundwater, you will need a dewatering plan to properly manage discharge of the water. You may be able to discharge the water to the storm sewer or the sanitary sewer depending on the type and concentration of contaminants. You must determine local and state permit requirements before implementing your dewatering plan.

Demolition plan – The demolition plan for removing existing structures during redevelopment should include handling, removal, and disposal of potential contaminants such as lead and asbestos. The demolition plan should also address recycling and reuse of existing on site materials like concrete. You may be able to save money by crushing and reusing concrete on site as fill material, or by hauling and crushing it off site to reuse it as fill at another property. This approach can save you considerable money compared to landfill disposal.

 

Ready to start saving time and money addressing contaminated historic fill at your next redevelopment? Contact Ray Tierney  for help evaluating your options in the Upper Midwest, or using the SCS Brownfield Redevelopment Checklist .

Live in another part of the country? SCS Engineers offers brownfields, remediation, due diligence, and all appropriate inquires services nationwide. Contact us today at [email protected].

Learn more about these services at SCS Engineers; read our case studies and articles:

Brownfields and Remediation
Due Diligence and All Appropriate Inquiries

 

 

 

 

 

 

Posted by Diane Samuels at 6:00 am
SCS Address

Corporate Headquarters

3900 Kilroy Airport Way Ste 100
Long Beach, CA 90806-6816
1 (562) 426-9544 | West Coast

Telephone

1 (800) 767-4727 | East Coast
1 (562) 427-0805 | FAX
[email protected]

Get In Touch




captcha

Subscribe To Our Resources

Sign up to receive periodic bulletins of environmental issues of interest such as: regulatory policy, court cases, tax incentives, emission standards, and more.

By signing up you agree to the terms and conditions outlined in our Privacy Policy.