Tyre Caza

October 24, 2022

SCS Engineers Environmental Consulting and Contracting
SCS Engineers Tim Flanagan, James Law, Deji Fawole, and Alex Stege (SWEET expert) proudly participate in ISWA 2022 and release of case studies, reports, and the tool SWEET that can benefit the world.

 

Using the Solid Waste Emissions Estimation Tool (SWEET), in 2020, International Solid Waste Association’s (ISWA) Task Force on Closing Dumpsites completed a study of waste sector short-lived climate pollutants (SLCPs) and other greenhouse gas (GHG) emissions in Tyre Caza, Lebanon. SWEET model runs used data on municipal solid waste (MSW) generation, collection, disposal, and diversion under existing and potential alternative management scenarios proposed in an Integrated Waste Management Plan (IWMP) for Tyre Caza. Waste sector emissions reductions exceeding 45% of baseline levels are achievable by 2030 if all dumpsites are closed and remediated, waste burning is stopped, and a new sanitary landfill is developed with 60% methane collection and combustion. Additional emissions reduction accrues from implementing the IWMP and upgrading existing waste treatment facilities to increase waste diversion rates from current levels (22%, including informal sector recycling) to 40%. Estimates of all of Lebanon’s waste sector emissions using SWEET were developed for this mini-review article using published data on the amounts of MSW collected, disposed, and diverted, with adjustments to account for indirect GHG reductions from composting and anaerobic digestion (AD). A 50% reduction in emissions from baseline levels can be achieved by 2034 if, by 2025 diversion of collected wastes to recycling, composting, and AD facilities are increased from 14% to 28%, and all residual MSW is disposed of in sanitary landfills with 65% methane recovery.

Conclusion: SWEET allows solid waste planners to compare emissions resulting from implementing different programs and to quantify the effectiveness of available waste management options in reducing emissions of GHGs and air pollutants. Full article access is on Sage Journals.

About SWEET: SWEET was developed by the U.S. Environmental Protection Agency (EPA) under the auspices of the Global Methane Initiative and in support of the CCAC. Abt Associates and SCS Engineers supported the development of SWEET. SWEET provides estimates for the full suite of GHG and air pollutant emissions in the waste sector, including methane, black carbon, CO2, nitrogen oxides, sulfur oxides, particulates, and organic carbon (CCAC, 2018). Emissions estimates are provided for the following sources: (1) waste collection and transportation, (2) open burning of waste, (3) landfills and open dumps, (4) organic waste management facilities (composting and anaerobic digesters), (5) waste-to-energy facilities and (6) waste handling equipment. Note that emissions from fuel and waste combustion are the only CO2 emissions included in SWEET’s calculations, which exclude biogenic CO2 emissions from waste disposal sites. Published reports by the US EPA (e.g., EPA, 1998, 2015), Intergovernmental Panel on Climate Change (e.g., IPCC, 2006), and other sources (e.g., SCS Engineers, 2007, 2009; United Nations Framework Convention on Climate Change (UNFCCC), 2004) were used to develop calculation methods and emissions factors for the waste sector emissions sources. CO2e conversions use a 100-year Global Warming Potential (GWP). The black carbon GWP is 900 (Bond et al., 2013).

 

Posted by Diane Samuels at 6:00 am